sf11 thru SF18 1.0 amp super fast recovery rectifiers 50 to 600 volts features ? fast switching speed ? marking : type number maximum ratings ? operating temperature: -55 to +125 ? storage temperature: -55 to +150 ? typical thermal resistance: 50.0 /w junction to ambient mcc part number maximum recurrent peak reverse voltage maximum rms voltage maximum dc blocking voltage sf11 50v 35v 50v sf12 100v 70v 100v sf13 150v 105v 150v sf14 200v 140v 200v sf15 300v 210v 300v sf16 400v 280v 400v SF18 600v 420v 600v electrical characteristics @ 25 unless otherwise specified average forward current i f(av) 1.0a t a = 55 peak forward surge current i fsm 30.0a 8.3ms, half sine maximum instantaneous forward voltage sf11-sf14 sf15-sf16 SF18 v f 0.95v 1.30v 1.70v i fm = 1.0a maximum dc reverse current at rated dc blocking voltage i r 5.0ua 100ua t a = 25 t a = 100 maximum reverse recovery time t rr 35.0ns i f =0.5a, i r =1.0a, i rr =0.25a typical junction capacitance sf11-sf14 sf15-SF18 c j 40pf 25pf measured at 1.0mhz, v r =4.0v revision: a 2011 /01/01 a b c d d cathode mark do-41 dimensions inches mm dim min max min max note a .166 .205 4.10 5.20 b .080 .107 2.00 2.70 c .028 .034 .70 .90 d 1.000 --- 25.40 ---
omponents 20736 marilla street chatsworth !"# $
% !"# mcc tm micro commercial components www. mccsemi .com 1 of 4 ? lead free finish/rohs compliant (note1) ("p"suffix designates compliant. see ordering information) note: 1. high temperature solder exemption applied, see eu directive annex 7. epoxy meets ul 94 v-0 flammability rating moisture sensitivity level 1
sf11 thru SF18 t rr +0.5a 0 -0.25 - 1.0 1cm set time base for 10ns/cm 25vdc 1 50 10 oscilloscope note 1 pulse generator note 2 notes: 1. rise time = 7ns max. input impedance = 1 megohm, 22pf 2. rise time = 10ns max. source impedance = 50 ohms 3. resistors are non-inductive figure 1 reverse recovery time characteri stic and test circuit diagram 1 100 4 0 6 12 18 8 figure 2 peak forward surge current peak forward s urge current - amperes versus number of cycles at 60hz - cycles amps cycles 2 6 10 20 60 80 40 24 30 36 8.3ms single half sine wave , jedec method average forward rectified current per leg - amperes versus ambient temperature - mcc tm micro commercial components www. mccsemi .com 2 of 4
figure 5 typical reverse characteristics instantaneous reverse leakage current - microamperes versus percent of rated peak reverse voltage - %volts volts 200 amps 0 100 2 0 40 60 80 5 50 500 140 t a =100 18 figure 4 typical junction characteristics instantaneous forward current -amperes versus instantaneous forward voltage - volts volts 1.0 amps 0 1.0 .2 .4 .6 .8 0.1 0.3 0.6 100 1.4 sf11-sf14 sf15-sf16 SF18 figure 6 typical junction characteristics capacitance - pf reverse voltage - volts pf 5 1 120 20 100 80 60 40 .1 .5 2 10 volts 20 50 100 200 500 1000 sf11 - sf14 sf1 5 - sf1 8 revision: a 2011 /01/01 mcc tm micro commercial components www. mccsemi .com 3 of 4
mcc revision: a 2011/01/01 tm micro commercial components www. mccsemi .com 4 of 4 1 device packing part number-tp tape&reel: 5kpcs/reel part number-ap ammo packing: 5kpcs/ammo box part number-bp bulk: 50kpcs/carton ***important notice*** micro commercial components corp. reserve s the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . micro commercial components corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . the user of products in such applications shall assume all risks of such use and will agree to hold micro commercial components corp . and all the companies whose products are represented on our website, harmless against all damages. ***life support*** mcc's products are not authorized for use as critical components in life support devices or systems without the express written approval of micro commercial components corporation. ***customer awareness*** counterfeiting of semiconductor parts is a growing problem in the industry. micro commercial components (mcc) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. mcc strongly encourages customers to purchase mcc parts either directly from mcc or from authorized mcc distributors who are listed by country on our web page cited below. products customers buy either from mcc directly or from authorized mcc distributors are genuine parts, have full traceability, meet mcc's quality standards for handling and storage. mcc will not provide any warranty coverage or other assistance for parts bought from unauthorized sources. mcc is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. ordering information :
|
